Paviland^® Impreso

Technical Caracteristics

Product based on high resistance Portland cement, selected aggregates, pigments and high purity additives.

Advantages and Uses

• Streets, pavements, outdoor areas and shopping centre entries, town streets with pedestrian and car traffic, entries and surrounding areas of single-family houses, swimming pools, residential areas, etc.
• Carparks. Parking areas.
• Walking areas in parks and gardens.
• Finishes in public squares.
• High mechanic resistance.
• High resistance to abrasion.
• Variety of textures and colours.
• Possibility of combining different types of stamped patterns.
• Patterns and tones are easily obtained by choosing the right mouldings and powder colors.
• Wearing resistant. Fading resistant.

Application Procedure

• Prepare the substrate with the appropriate mesh to reinforce the concrete.
• Protect the areas that must be left clean.
• Pour the concrete and smooth with the trowel.
• Dust PAVILAND STAMPED on the fresh concrete.
• Smooth down with telescopic trowel so that the concrete can absorb the surface coat formed by PAVILAND STAMPED.
• Ensure that PAVILAND STAMPED fully covers the application areas. Use more product if in doubt and trowel again.
• After a reasonable time, when the concrete has started hardening, dust PAVILAND DEMOULDING AGENT to avoid the adherence of the moulds.
• The moulds are set and pressed uniformly, so that the pattern is stamped in an even way.
• Wait 72 hours and then clean the demolding agent from the flooring by means of water pressure jet..
• Finish the flooring by applying a hardening resin (the use of a pump is highly recommended).

Recommendations

• Do not apply below 5ºC nor above 30ºC.
• Do not apply when there is a risk of frost, rain, strong wind or direct sunlight.

Packaging and Storage

25 kg plastic-lined paper bags.
Shelf life: 1 year in sealed original packaging, sheltered from weather conditions and humidity.

Technical data

(Statistical data obtained under standard conditions)