Paviland^® Asfalto en frío

Technical Caracteristics

Product based on recycled asphalt obtained from the milling of existing road surfaces, combined with an organic reactivating additive and nanopolymers.

Advantages and Uses

• Due to its strength, it is ideal for use in potholes, trenches, road repairs, urban roads, residential developments, and small-scale works.
• Once applied and compacted, it becomes solid, achieving strength and performance comparable to traditional asphalt, with immediate reopening to traffic. It remains stable, flexible, and durable, meeting all the required characteristics for this type of pavement.
• PAVILAND ASFALTO EN FRÍO (COLD ASPHALT) is the ideal solution for repairing deteriorated asphalt surfaces and pothole patching.
• Thanks to its packaging format and shelf life, PAVILAND ASFALTO FRÍO is perfect for local councils, building materials warehouses , road maintenance companies, and gas and potable water maintenance services, among others.
• It can be applied over a wide temperature range (-10°C to +50°C). After application, it becomes solid and compact, similar to conventional hot asphalt, with the advantage of cold application and a storage life of up to 2 years.
• 100% recycled material Gives asphalt a second life.
• Does not get machinery dirty during application or tyres after immediate reopening to traffic.
• Does not contain emulsifiers harmful to health or the environment.
• Low carbon footprint in its manufacturing process, as it is produced entirely cold.

Application Procedure

• Clean the area before application. It is not necessary for the surface to be dry; the product can be applied on wet pavement. 
• Pour, loosen, open, and spread the mixture evenly. DO NOT COMPACT BY IMPACT, as the product will harden (this is  its intended behaviour).
• Spread the mixture evenly over the entire surface to a thickness of 2.5 to 5 cm (leave approximately 20% excess material in height to get the right level  after compaction).
• Compact from the outside towards the centre using appropriate machinery until a smooth and uniform surface is achieved.
• If the repair thickness exceeds 5 cm, the above compaction process must be conducted in several layers.

Recommendations

• Application temperature: between -10°C and +50°C. 
• Do not apply in thicknesses below 2.5 cm.

The instructions for use are based on our tests and knowledge and do not constitute a binding commitment. They do not exempt the user from conducting their own testing and verification of the product for its correct use.

The company’s liability shall be limited to the value of the goods used. Claims should be made with the original packaging in order to conduct the correct transaction.

Comsumption/Coverage

Approximately 20 kg/m² per cm of thickness. Optimal thickness of 3 to 5 cm.

Technical data

Notas

The instructions for use are given according to our tests and knowledge and do not imply any commitment by GRUPO PUMA nor free the consumer from the examination and verification of the products for their correct use. Claims must be accompanied by the original packaging to allow a proper traceability.

GRUPO PUMA is not responsible, in any case, for the application of its products or constructive solutions carried out by the application company or other parties involved in the process and / or execution of the work, limiting the responsibility of GRUPO PUMA exclusively to the damages directly attributable to the supplied products, individually or integrated in systems, due to failures in their manufacturing process.

In any case, the drafter of the work project, the technical management or the person responsible for the work, or collaterally the application company or other parties involved in the process and / or execution of the work, must ensure the suitability of the products addressing the characteristics of them, as well as the conditions, support and possible pathologies of the work in question.

The values obtained by GRUPO PUMAS's products or its constructive solutions that, as the case may be, are determined by the EN standards or any other regulation that applies to it in each case refers exclusively to the conditions specifically stipulated in said regulation and that are referred to, among others, to certain characteristics of the support, humidity and temperature conditions, etc. without being them required in the tests obtained under different conditions, all in accordance with the relevant regulation.